安科瑞盛桂萌：18706168072

传统温度传感器电池取电or感应取电。

电池取电的弊端在于电量耗尽后，更换会有更换期间数据中断。感应取电需要启动值，未到达启动值时无法工作。

新颖的设计理念

1 安装指南

1 Installation Guide

1.1 产品概述

1.1 Product Introduction ACE100 无线温度电流复合传感器主要用于低压开关柜输电电缆的的温度和电流的检测。传感 器采用内部电池和电磁取能的双供电方式，快速准确的测量低压电缆的温度及电流数据，通过无线 的方式上传至接收装置。产品安装方便，全面检测电缆数据，可帮助用户及早发现线路隐患，保障 供电安全，实现配电网络智能化。 The ACE100 wireless temperature & current sensor is mainly used to detect the temperature and current of the transmission cable of the low-voltage switchgear. The sensor adopts the dual power supply mode of internal battery and electromagnetic energy extraction to quickly and accurately measure the temperature and current data of low-voltage cables, and upload them to the receiving device via wireless. The product is easy to install and comprehensively detect cable data, which can help users find hidden dangers in the line as early as possible, ensure power supply safety and realize intelligent distribution network.

型号说明

技术指标

技术指标

1.4 产品安装

1.4 Product Installation

1.4 产品安装

1.4 Product Installation

ACE100 无线温度电流复合传感器，采用开口型卡扣式安装方式。安装时将传感器贴紧待测电

缆，完全扣紧 CT 卡扣。当电缆电流小于传感器感应取电启动电流时，传感器使用内部电池进行工

作，如果电流大于传感器感应取电启动电流，传感器将感应取电工作，节省电池电量。

The ACE100 wireless temperature & current sensor is installed in an open snap type. During

installation, the sensor shall be tightly attached to the cable to be tested, and the CT snap shall be fully

1.5 使用方案

1.5 Usage scheme

触摸屏 ATP007/ATP010 搭配 ATC600-C： HMI ATP007/ATP010 with ATC600-C:

*博客内容为网友个人发布，仅代表博主个人观点，如有侵权请联系工作人员删除。